Spray Plaster

Alltek surface coatings: a highly cost effective alternative to traditional thin-coat plasters for internal wall & ceiling finishes. Purpose-designed for rapid application on fast-track building projects, and now adapted for new-build and refurbishment commercial, industrial & residential projects.

Spray directly onto:

• in-situ concrete
• thin-joint blockwork
• brickwork* and blockwork*
• plasterboard
• ceramic tiles
• any existing plastered surfaces
• Artex
• even steel & glass!

---

1. FAST application & RAPID drying, reduces construction time – can dry within 8 hours *
2. Consistent ready-mixed QUALITY; delivered to site in 25kg waterproof bags
3. Pre-finished in white – SAVES TIME & EXPENSE on further decoration
4. Textured ceilings need NO further decoration
5. Decorate with mist & 1 full emulsion coat, SAVING on decoration TIME & EXPENSE
6. Covers Artex ceilings EASILY without primers or removal
7. Absorbs moisture thus REDUCING the incidence of condensation
8. Inherent FLEXIBILITY - less prone to cracking
9. Fire, Acoustic & Thermal performance & Mechanical strength BETTER than traditional plastering
10. Narrower, cheaper door linings can be installed - SAVES MONEY
11. Refurb & new build, housing & commercial projects; 300 – 600m2 / week (1-man operation)
12. System designed for fast track new build projects; 600 – 1000 m2 / week (2 man team)
13. Up to 10 YEARS PRODUCT GUARANTEE available

Alltek thin-coat spray applied plaster is delivered to site palletised in forty 25kg plastic bags (contained in two shrink-wrapped cardboard cartons per pallet, weighing in at just over a tonne inclusive per pallet), which makes for easy on-site re-distribution. Bags are robust and readily man-handable with an integral carrying handle.

Surfaces to be sprayed require minimal preparation - just a little light sanding to remove loose material. Sprayed using specialist plant by approved contractors, the first-coated surfaces can be re-sprayed once dry, and lightly sanded in as little as eight hours, although being left overnight is more common-place. Second-coated surfaces may require a light sanding too before being painted some 18 to 24 hours later (dependent upon ambient conditions).

A mist coat and one full coat of emulsion is recommended for all wall surfaces, but this is all that is required for a finish.  Emulsion paints bind with Alltek to provide an even tougher surface than can be acheived with Alltek alone.

• Alltek can be specified in any standard RAL or NCS colour
• Smooth or textured (worked or self-textured) finishes are possible

---

Please visit our Gallery for examples of our work and the many applications of Alltek.

Return to Top